Where coatings fit in Coconut Creek
Coconut Creek is a city of condo communities, townhomes and single-family neighborhoods, many of them built in the 1970s through the 1990s. Big communities like Wynmoor have hundreds of low-rise buildings with flat or nearly flat roofs. Single-family homes usually have tile or shingle on the main roof, but a Florida room, a converted garage or a rear addition often has a low-slope roof with modified bitumen or an older built-up system.
Those low-slope roofs face a tough mix here: strong sun almost all year, daily summer downpours from June through October, and water that lingers in low spots. A roof coating is one way to protect them without tearing everything off.
What a roof coating does
A roof coating is a fluid-applied membrane rolled or sprayed over an existing roof. It cures into a seamless rubbery layer that covers small cracks, seals seams and blocks UV from breaking down the roof below. White coatings also reflect a large share of the sun's heat, which can help keep the rooms underneath cooler.
A coating is not a fix for a roof that is already failing. If insulation or decking is soaked, a coating on top just traps the problem. That is why we start every coating job with a close look, and sometimes a few core samples, to confirm the roof is dry and sound.
Coating types we use
Silicone. Our usual choice for flat roofs here because it handles ponding water well and stays flexible in heat.
Acrylic. A good value on roofs that drain well, with excellent reflectivity. It does not like standing water.
Other systems. Some metal roofs and specialty surfaces call for a different chemistry. We match the coating to the roof, not the other way around.
Broward County is in the High Velocity Hurricane Zone, so we use products with Florida product approval for the roof type and follow the manufacturer's application rules, including mil thickness and any reinforcement at seams and penetrations.
Our coating process
- Inspection. We walk the roof, look for blisters, soft spots and failed seams, and check drains and scuppers.
- Repairs. Wet or damaged sections are cut out and replaced. Seams, flashings and penetrations are reinforced. If the roof needs more than spot work, see our flat roof repair.
- Cleaning. We wash off dirt, mildew and algae. In our climate, clean surfaces are essential for adhesion.
- Primer. Some roofs need a primer or base coat to bond.
- Coating. We apply the coating in one or more coats to the required thickness and check the coverage.
Working around the rain
Afternoon storms are a given for much of the year. We start early, watch the radar and only coat when the surface is dry and the product has enough time to set before rain. In the drier months, roughly November through April, scheduling is easier, and many condo associations plan coating work for that window.
Condo and association roofs
For associations, a coating can stretch the budget between full replacements. We provide photos, a written scope and a maintenance schedule the board can review. For larger buildings, our commercial roofing team handles the full project, including working around residents and parked cars.
What coatings are not for
We do not recommend coating concrete or clay tile roofs. Tile needs to shed water and breathe, and the real waterproofing is the underlayment beneath it. If a tile roof is leaking, the fix is a repair or underlayment replacement, not paint.
Keeping a coated roof in shape
Once a year, and after any named storm, have someone look at the coated roof. Keep drains and scuppers clear of leaves and palm debris, trim back branches that rub the surface, and ask the AC company to protect the roof when they service rooftop units. Small scuffs and punctures are easy to patch with the same coating if they are caught early.
Common questions
How long does a coating last? It depends on the product and thickness, but many systems carry manufacturer warranties of ten years or more, and they can be recoated later.
Will it lower my power bill? A white coating reflects heat, which can help, but results vary by insulation and AC.
Can you check my roof first? Yes. Start with a roof inspection.
Find out if your roof can be coated
Call (954) 994-2032. We will check the roof for wet areas, take photos and give you a written scope and price.